metal detector scanner belt conveyor metal detectors High sensitivity
Product Description:
CXJ-B series metal detector (CXJseries metal detector) is a model specially developed for detecting metals in magnetic and non-magnetic material belt conveyor systems (such as ferrous and non-ferrous metal mines, iron and steel plants, sintering plants, etc.). It can detect the "material effect" produced by magnetic ores with a material grade below 70%. When harmful metals in the material pass through the sensor, the metal detector alarms and gives a control signal. The sensor is a window design, without partition tape, and is easy to install.
The metal detector mainly consists of two parts: a CNC box and a sensor. It uses advanced digital processing technology to automatically analyze the composition and grade of the ore, plant effect compensation, dedicated chip digital electrical appliances, and digital phase shift detection, multi-frequency, and multi-channel technology. It has stable performance, high detection sensitivity, and strong anti-interference ability. It is suitable for belt conveyors in various industries such as thermal power generation, metallurgy, coal, cement, ore, etc., which are used for conveying and processing systems of magnetic or non-magnetic bulk materials. It can accurately detect various metal debris mixed in the materials, such as iron, steel, manganese steel, stainless steel, copper, aluminum, etc. It solves the problem that iron ore, stone ore and other mining enterprises cannot use iron removers to remove large pieces of iron, steel, manganese steel, etc., which cause serious damage to the back-end equipment, and fills the domestic gap in the field of metal detectors.
Features: Quantitative sensitivity adjustment, high sensitivity design can detect super large metals and sound and light alarms.
Detection range: iron, aluminum, stainless steel, alloy and other metals.
Timing function: delayed release after the relay is attracted, the time is 1-10 seconds.
Control output: one pair of relay contacts is normally open, and one pair is normally closed.
Installation method: The sensor is installed on the belt frame, and the amplitude of the belt frame should be less than 0.5mm. When the amplitude exceeds 0.5mm, the sensor bracket should be installed separately.
Note: When the power supply voltage is unstable, a voltage stabilizer should be used.
Product Tags:
|
|
High Sensitivity Metal Detector Scanner Belt Conveyor Metal Detectors Automatic Images
|
